图片加载失败文案


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

图片加载失败文案


Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C，8h
Printing and Keeping Container’s Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 260 – 280 °C
Bed Temperature (with PVP Glue) 90 – 110 °C
Printing Speed < 300 mm/s
Physical Properties
Density 1.20 g/cm³
Vicar Softening Temperature 119 °C
Heat Deflection Temperature 117 °C
Melting Temperature 228 °C
Melt Index 32.2 ± 0.6 g/10 min
Mechanical Properties
Tensile Strength 62 ± 2 MPa
Breaking Elongation Rate 3.8 ± 0.3 %
Bending Modulus 2310 ± 70 MPa
Bending Strength 108 ± 4 MPa
Impact Strength 34.8 ± 2.1 kJ/m²


Filament*1 & Desiccant*1

pc filament

Instructions*1 & Spool Sticker*1

pla basic

Package*1

pc filament

Filament Label*1


图片加载失败文案


Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

图片加载失败文案


2.If you don’t have the spool model in your printer,
please click here to download.


Instructions for Printed Spool

abs filament

When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.